Sika Monotop 4012 – 25KG (Formerly Monotop 612)
This Variant Includes
This item is in these bundles
Sika MonoTop®-4012 is a one-part, cementitious, fibre reinforced, low shrinkage repair mortar. It contains recycled raw materials and can reduce the carbon footprint application activity calculations.
Sika Monotop 4012 Advantages
Sika Monotop 4012 has tonnes of advantages to add to your construction project. These include:- Uses recycled materials
- Sulphate resistant
- hand and machine application
- Very low shrinkage
- Good resistance to sea water.
- Layer thickness 6 to 120 mm.
- Class R4 of EN 1504-3.
- Hand and machine application (wet spray technique).
Sika Monotop 4012 Uses
Sika Monotop 4012 is used to repair all types of reinforced concrete structures and components for:- Buildings.
- Civil engineering structures.
- Dams.
- Marine structures.
- Suitable for interior or exterior applications.
- Sewage and waste water treatment plants.
Sika Monotop 4012 is also used for:
- Restoration work (Principle 3, method 3,1 and 3,3 of EN 1504-9). Repair of spalling and damaged concrete in infrastructure and superstructure works.
- Structural strengthening (Principle 4, method 4,4 of EN 1504-9). Increasing the bearing capacity of the concrete structure by adding mortar.
- Preserving or restoring passivity (Principle 7, method 7,1 and 7,2 of EN 1504-9) - Increasing cover with additional mortar and replacing contaminated or carbonated concrete.
Download Sika Monotop 4012 technical datasheet (PDF)
Take a look at the rest of the Sika Monotop Range:
Sika Monotop 3020 (Formally Monotop 620)
Sika Monotop 1010 (Formally Monotop 610)
Sika Monotop 115 *Discontinued
Specifications
Specifications
Delivery and Return
Charges start from £6.90 inc vat on small, lightweight orders and £22.50 inc vat on heavier or difficult to transport items.
All small item orders with a value of £100.00 inc vat will be carriage paid.
All large item orders with a value of £200.00 inc vat will be carriage paid.
*small or large classification of items are determined by weight and dimension of product*
Please note that your order may need to be split into separate packages if over 30KG.
All of the above is based on UK Mainland deliveries, further charges may be incurred if the delivery address is outside of this.
We are also currently unable to deliver outside of the UK on our regular carrier so if you require delivery outside the UK please call or email the details to the office as we reserve the right to refuse service or refund orders based on this.
Guarantee next day delivery.
Some of our products have a note that states – if ordered before 1pm and being delivered to UK mainland on a next day basis.
Please note that given the current circumstances alot of carrier companies are struggling to keep up with demand and although we do book these deliveries as next day services, the carriers cannot always fulfil these and an extra day may be required.
A high percentage of our advertised goods are stock items but be aware that if you are taking very large quantities of stock that we may not be able to fill your order fully on first delivery. Please call the office to check to not be disappointed.
We are also an active trade counter and part of a larger network of companies so stock can be taken at any time but we will always aim to deliver your goods as soon as possible.
Also if ordered along side goods that we cannot guarantee next day delivery on, these will be delivered based on the schedule of the other item.
Signature required on delivery.
The carrier we currently use requires a signature for all deliveries as a proof of delivery. If you cannot guarantee someone will be home to receive this please leave delivery instructions for a safe place or neighbour to leave your goods with. Due to covid and new contactless deliveries, our carriers will not require a signature but will take down the recipients name as POD.
If no one is available to take the delivery, the courier will leave details at the address to rearrange delivery or may leave with a neighbour. Note we may need to make an additional handling charge for the return and re-delivery if a package is unable to be delivered multiple times due to no one being home to receive this. Due to covid our carriers are restricting the number of re-delivery attempts.
After three attempted deliveries our carrier will return the goods to ourselves and in this worst case situation, we may cancel the order and refund your money, excluding any additional charge for the return and re-deliveries.
Materials delivered from our own stock.
Normally 1 – 2 days (this can sometimes be longer if we are waiting for manufacturers’ stock to arrive into ours).
If the order is placed before 1:00pm and all of the items are in stock, then we will endeavour to dispatch your order same day for delivery the following day.
This still applies for deliveries out of our local area but please note that we use independent carriers so be aware that there may be external factors which we cannot control (e.g Far out postcodes or local traffic situations)
Materials delivered direct from the manufacturer.
There may be some occasions when it is more efficient or cost effective to have the materials shipped direct from our suppliers to the customer.
We will place the order immediately upon receipt of your order but this can sometimes take a few working days depending on the manufacturers production schedule or carrier used.
We will always endeavour to get the goods to the customer at the earliest possible date but if these are urgently required, please speak to us to check.
Please note that many manufacturers will offer a next day delivery service at an increased delivery cost and also a cut of time for this order to be placed (usually around 11am / 12pm)
Please call us on 08454 530 017 between 8am and 5pm Monday – Friday or email us on [email protected] for any delivery queries, or urgent requirements.
Please read our full terms and conditions with regard to full details on deliveries.
Sika MonoTop®-4012 is used to repair all types of reinforced concrete structures and components for:
- Buildings
- Civil engineering structures
- Dams
- Marine structures
- Suitable for interior or exterior applications
- Sewage and waste water treatment plants
There are lots of benefits of using Sika Monotop 4012, such as:
- Uses recycled raw materials.
- Layer thickness 6–120 mm.
- Sulphate resistant.
- Hand and machine application (wet spray technique).
- Easy to apply.
- Very low shrinkage.
- Dust reduced.
- Good resistance to sea water.
- Does not require a bonding primer.
- Low permeability.
- Euroclass A1 fire rating.
- Class R4 of EN 1504-3.
- Resistant to sulfuric acid attack (exposure classes XWW1 and XWW3).
Yes, this product is suitable for interior and exterior applications.
For horizontal applications, the minumum thickness should be 6 mm and the maximum 120 mm.
For vertical applications, the minumum thickness should be 6 mm and the maximum 85 mm (120 mm in localised areas).
For overhead applications, the minumum thickness should be 6 mm and the maximum 30 mm (50 mm in localised areas).
This product is not waterproof, but it does have good resistance to sea water.
The flexural strength of Sika Monotop 4012 is:
- 1 day: 4.4 MPa
- 7 days: 7.0 MPa
- 28 days: 8 MPa
The pre-treatment instructions for surfaces prior to application are:
Concrete
- The substrate must be thoroughly clean, free from dust, loose material, surface contamination and material that reduces adhesion or prevents suction or wetting by repair materials.
- Remove delaminated, weak, damaged and deteriorated concrete and where necessary, sound concrete. Remove using mechanical handheld tools or high / ultra-high-pressure water blasting equipment.
- Make sure sufficient concrete is removed from around corroded reinforcement to allow cleaning, corrosion protection coating (where required) and compaction of the concrete repair mortar.
- Repair surface areas must be prepared to provide simple square or rectangular layouts to avoid shrinkage stress concentrations and cracking while the repair material cures. This can also avoid structural stress concentrations from thermal movement and loading during the service life.
Steel reinforcement
- Remove rust, scale, mortar, concrete, dust and other loose and deleterious material which reduces bond or contributes to corrosion.
- Prepare surfaces to bright steel using abrasive blast cleaning or high-pressure water blasting equipment.
When applying Sika Monotop 4012, avoid application in direct sun, strong winds or both to reduce the risk of the product cracking.