Skip to content
Confidence builder icon

Next day delivery

Confidence builder icon

Largest building products ranges in the uk

Confidence builder icon

Trusted technical advice

Confidence builder icon

Need help? Browse our FAQ

Fosroc Conbextra PM - 20KG

Fosroc Conbextra PM - 20KG

(no customer review)Add a review
£19.44(Inc VAT)
£16.20(Ex VAT)
SKU: 8493Category: Special Application Grout Brand: Fosroc
Fosroc Conbextra PM is a single pack cement-based thixotropic pumpable mortar, blended from cements, fine aggregates and admixtures with a maximum gra... Read full description

This Variant Includes

This item is in these bundles

Fosroc Conbextra PM is a single pack cement-based thixotropic pumpable mortar, blended from cements, fine aggregates and admixtures with a maximum grain size of less than 1 mm. It requires only the addition of clean water to produce an easily pumped mortar.

Fosroc Conbextra PM uses:

This mortar is designed to be used for grouting gaps in precast units and high-strength pointing which can be used in applications such as:

  • Base Plate Grouting: Conbextra PM is commonly used to grout base plates, ensuring even load distribution and preventing movement.
  • Precision Grouting: Conbextra PM is suitable for a range of precision grouting applications where complete and thorough coverage is required.
  • Machine Base Grouting: Conbextra PM can be used to anchor heavy machinery to foundations, providing stability and vibration resistance.
  • Stanchion Grouting: Conbextra PM can be used for grouting stanchion baseplates, contributing to the stability of structures.

Fosroc Conbextra PM benefits:

  • Fast installation rate
  • Pump application
  • No priming required
  • Pre blended to save time on site and to overcome site-batching variations.
  • Rapid strength gain
  • Shrinkage compensated

Fosroc Conbextra PM Application Instructions

  • Prepare the surface by removing loose friable substrates and ensuring that it is free from oil, paint, and other contaminants.
  • Mix Conbextra PM thoroughly.
  • Apply Conbextra PM to the prepared surface using a pump or by hand.
  • Tool the material to the desired profile while it is still wet.
  • Clean up immediately after use.
Here are some additional tips to consider whilst using Conbextra PM:
  • Use clean water to mix and clean Conbextra PM.
  • Do not use Conbextra PM below 3 OC.
  • Do not expose Conbextra PM to moving water during application.
  • Do not apply Conbextra PM to surfaces that have been exposed to heavy rainfall prior to the final set.

    Fosroc Conbextra PM Size - 20KG

    Download the Fosroc Conbextra PM Technical Datasheet (PDF)

    If ordered before 1PM guaranteed next working day delivery to UK mainland

    More from the Fosroc Conbextra Range

    Take a look at the full Fosroc Conbextra range:



    Delivery and Return

    Charges start from £6.90 inc vat on small, lightweight orders and £22.50 inc vat on heavier or difficult to transport items.

    All small item orders with a value of £100.00 inc vat will be carriage paid.

    All large item orders with a value of £200.00 inc vat will be carriage paid.

    *small or large classification of items are determined by weight and dimension of product*

    Please note that your order may need to be split into separate packages if over 30KG.

    All of the above is based on UK Mainland deliveries, further charges may be incurred if the delivery address is outside of this.

    We are also currently unable to deliver outside of the UK on our regular carrier so if you require delivery outside the UK please call or email the details to the office as we reserve the right to refuse service or refund orders based on this.

    Guarantee next day delivery.

    Some of our products have a note that states – if ordered before 1pm and being delivered to UK mainland on a next day basis.

    Please note that given the current circumstances alot of carrier companies are struggling to keep up with demand and although we do book these deliveries as next day services, the carriers cannot always fulfil these and an extra day may be required.

    A high percentage of our advertised goods are stock items but be aware that if you are taking very large quantities of stock that we may not be able to fill your order fully on first delivery. Please call the office to check to not be disappointed.

    We are also an active trade counter and part of a larger network of companies so stock can be taken at any time but we will always aim to deliver your goods as soon as possible.

    Also if ordered along side goods that we cannot guarantee next day delivery on, these will be delivered based on the schedule of the other item.

    Signature required on delivery.

    The carrier we currently use requires a signature for all deliveries as a proof of delivery. If you cannot guarantee someone will be home to receive this please leave delivery instructions for a safe place or neighbour to leave your goods with. Due to covid and new contactless deliveries, our carriers will not require a signature but will take down the recipients name as POD.

    If no one is available to take the delivery, the courier will leave details at the address to rearrange delivery or may leave with a neighbour. Note we may need to make an additional handling charge for the return and re-delivery if a package is unable to be delivered multiple times due to no one being home to receive this. Due to covid our carriers are restricting the number of re-delivery attempts.

    After three attempted deliveries our carrier will return the goods to ourselves and in this worst case situation, we may cancel the order and refund your money, excluding any additional charge for the return and re-deliveries.

    Materials delivered from our own stock.

    Normally 1 – 2 days (this can sometimes be longer if we are waiting for manufacturers’ stock to arrive into ours).

    If the order is placed before 1:00pm and all of the items are in stock, then we will endeavour to dispatch your order same day for delivery the following day.

    This still applies for deliveries out of our local area but please note that we use independent carriers so be aware that there may be external factors which we cannot control (e.g Far out postcodes or local traffic situations)

    Materials delivered direct from the manufacturer.

    There may be some occasions when it is more efficient or cost effective to have the materials shipped direct from our suppliers to the customer.

    We will place the order immediately upon receipt of your order but this can sometimes take a few working days depending on the manufacturers production schedule or carrier used.

    We will always endeavour to get the goods to the customer at the earliest possible date but if these are urgently required, please speak to us to check.

    Please note that many manufacturers will offer a next day delivery service at an increased delivery cost and also a cut of time for this order to be placed (usually around 11am / 12pm)

    Please call us on 08454 530 017 between 8am and 5pm Monday – Friday or email us on [email protected] for any delivery queries, or urgent requirements.

    Please read our full terms and conditions with regard to full details on deliveries.

    Fosroc Conbextra PM is a single component thixotropic cementitious
    pumping and pointing mortar.

    Its typical applications are for structural grouting of gaps in precast units and high-strength pointing.

    Yes, it can be used to anchor machinery to foundations, providing stability and vibration resistance.

    Yes, it can be used for anchoring heavy machinery or equipment to foundations, providing stability and vibration resistance.

    Conbextra PM does not have a specific 'curing time' as it is usually put into smaller joints & gaps, falling under 'compressive strength'. The minimum time would be 1 full day and with its strength increasing over time.

    Yes, as long as the application is under correct temp conditions & avoids heavy rainfall.

    Yes, these include:

    - Avoid contact with skin and eyes.
    - Avoid the generation and spreading of dust.
    - Avoid inhalation of dust.
    - Mechanical ventilation or local exhaust ventilation may be required.
    - Change contaminated clothing.
    - Do not eat, drink or smoke when using the product

    Conbextra PM has a shelf life of 12 months, however, if stored at high temperature and/or humidity the shelf life may be reduced to 4 months.

    Conbextra PM should be stored internally in dry conditions in original unopened bags.